Caesium carbonate supported on hydroxyapatite‐encapsulated Ni0.5Zn0.5Fe2O4 nanocrystallites as a novel magnetically basic catalyst for the one‐pot synthesis of pyrazolo[1,2‐b]phthalazine‐5,10‐diones

A novel nanomagnetic basic catalyst of caesium carbonate supported on hydroxyapatite‐coated Ni_0.5Zn_0.5Fe₂O₄ magnetic nanoparticles (Ni_0.5Zn_0.5Fe₂O₄@HAP‐Cs₂CO₃) was prepared. This new catalyst was fully characterized using Fourier transform infrared spectroscopy, transmission and scanning electron microscopy, X‐ray diffraction and vibrating sample magnetometry techniques, and then the catalytic activity of this catalyst was investigated in the synthesis of 1H‐pyrazolo[1,2‐b]phthalazine‐5,10‐dione derivatives. Also, Ni_0.5Zn_0.5Fe₂O₄@HAP‐Cs₂CO₃ could be reused at least five times without significant loss of activity and could be recovered easily by applying an external magnet. Thus, the developed nanomagnetic catalyst is potentially useful for the green and economic production of organic compounds. Copyright © 2015 John Wiley & Sons, Ltd.     

“翻转+分段式”有机化学实验教学设计及实践研究

以FeCl3·6H2O催化合成乙酸乙酯为教学内容,采用“翻转+分段式”混合教学方法对整个实验过程进行了改革探索。通过教师准备学习资源,学生自主学习,课堂分段讲解,互动交流以及跟踪评价等,探讨了大学有机化学实验实施“翻转+分段式”混合教学方法的有效途径。实践结果表明:混合教学模式能够显著促进学生对实验内容的理解和掌握,明显增加学生自主操作的时间,还能有效降低实验过程中的安全隐患。     

ParaHydrogen Polarized Ethyl-[1-13C]pyruvate in Water,a Key Substrate for Fostering the PHIP-SAH Approach to Metabolic Imaging

An efficient synthesis of vinyl-[1-¹³C]pyruvate has been reported, from which ¹³C hyperpolarized (HP) ethyl-[1-¹³C]pyruvate has been obtained by means of ParaHydrogen Induced Polarization (PHIP). Due to the intrinsic lability of pyruvate, which leads quickly to degradation of the reaction mixture even under mild reaction conditions, the vinyl-ester has been synthesized through the intermediacy of a more stable ketal derivative. ¹³C and ¹H hyperpolarizations of ethyl-[1-¹³C]pyruvate, hydrogenated using ParaHydrogen, have been compared to those observed on the more widely used allyl-derivative. It has been demonstrated that the spin order transfer from ParaHydrogen protons to ¹³C, is more efficient on the ethyl than on the allyl-esterdue to the larger J-couplings involved. The main requirements needed for the biological application of this HP product have been met, i. e. an aqueous solution of the product at high concentration (40 mM) with a good ¹³C polarization level (4.8 %) has been obtained. The in vitro metabolic transformation of the HP ethyl-[1-¹³C]pyruvate, catalyzed by an esterase, has been observed. This substrate appears to be a good candidate for in vivo metabolic investigations using PHIP hyperpolarized probes.     

Palladium-Catalyzed Asymmetric Trifluoromethylated Allylic Alkylation of N-Substituted Glycine Ethyl Esters with α-(Trifluoromethyl)alkenyl Acetates

An efficient strategy for asymmetric trifluoromethylated allylic alkylation of easily available N-substituted glycine ethyl esters with α-(trifluoromethyl)alkenyl acetates has been developed. Catalyzed by a [Pd(C₃H₅)Cl]₂/(R)-BINAP, various trifluoromethyl-containing N-substituted glycine ethyl ester derivatives are afforded with good yields and excellent enantioselectivities. The product can be readily converted into diverse fluoro-substituted species, which shows the practicability of this method.     

HPLC–ICP–MS法测定农田土壤中甲基汞和乙基汞

采用HPLC反相C18柱分离、ICP–MS检测,建立了农田土壤中甲基汞和乙基汞的分析方法。以0.5mol/L的硝酸溶液为浸提剂,超声波提取1 h,在优化的仪器条件下测定,甲基汞和乙基汞的质量浓度在0.1~50ng/m L范围内与谱线强度呈良好线性关系(r≥0.999),检出限分别为0.1,0.2 ng/m L;加标回收率分别为89.26%~94.26%,76.88%~79.27%;相对标准偏差分别为1.67%~2.38%,2.58%~3.84%(n=5)。该方法样品前处理简单、重现性好、检出限低、准确度高,适合于农田土壤中甲基汞和乙基汞的同时测定。     

顶空气相色谱法测定工作场所空气中的乙酸乙酯

采用顶空气相色谱法测定工作场所空气中的乙酸乙酯。气态乙酸乙酯用活性炭管吸附,二氯甲烷解吸,顶空进样,HP–FFAP毛细管柱分离,FID检测器测定,峰面积定量。乙酸乙酯的质量浓度在1.76~880.0μg/m L范围内与色谱峰面积呈良好的线性,相关系数r=0.999 4。不同浓度样品批内测定结果的相对标准偏差为1.34%~3.61%(n=7),批间测定结果的相对标准偏差为1.04%~4.78%(n=7),加标回收率为91.02%~100.29%,方法检出限为0.32μg/m L,解吸效率为91.28%~95.19%。对于100 mg活性炭,乙酸乙酯的穿透容大于2.2 mg,当其浓度在17.6~17 600 mg/m3时,采样效率为91.23%~97.40%,常温下可以保存10 d。该方法各项指标均达到《工作场所空气中有毒物质检测方法研制规范》的要求,适用于工作场所空气中乙酸乙酯的现场监测。     

Chloroacetate‐Promoted Selective Oxidation of Heterobenzylic Methylenes under Copper Catalysis

The efficient selective oxidation and functionalization of C? H bonds with molecular oxygen and a copper catalyst to prepare the corresponding ketones was achieved with ethyl chloroacetate as a promoter. In this transformation, various substituted N‐heterocyclic compounds were well tolerated. Preliminary mechanistic investigations indicated that organic radical species were involved in the overall process. The N‐heterocyclic compounds and ethyl chloroacetate work synergistically to activate C? H bonds in the methylene group, which results in the easy generation of free radical intermediates, thus leading to the corresponding ketones in good yields.     

Pesticide residues analysis in honey using ethyl acetate extraction method: validation and pilot survey in real samples

This paper presents a cost-effective and validated multi residue confirmatory method for the determination of 167 chemically different pesticides and a survey study on Cyprus honey samples. This method uses ethyl acetate for the extraction of pesticides from honey and the determination is performed with liquid chromatography (LC) coupled to mass spectrometry (MS) operating in tandem mode (MS/MS) and with GC–ECD (gas chromatography with electron capture detector) analysis. The LC-MS/MS analytical system is especially important in the analysis of polar and non-volatile pesticides. For the validation of the method, blank honey samples were spiked with 146 pesticides (organophosphorous, carbamates, triazoles, amides, neonicodinoids, strobilurines, phenylureas, bendimidazoles and others) for the LC-MS/MS analysis at three levels: 0.01, 0.05 and 0.1 mg kg^?1 and with 21 pesticides for the GC-ECD analysis at two levels: 0.01 and 0.05 mg kg^?1for organochlorines and 0.05 and 0.2 mg kg^?1for the pyrethroids. As blank sample, a sample of honey which did not contain detectable levels of the analytes sought was used. The validation study was in accordance to the DG SANCO guidelines. The scope of validation included recovery, linearity, limits of quantification and precision. Linearity is demonstrated all along the range of concentration that was investigated with correlation coefficients ≥0.98. Recoveries of the majority of compounds were in the 70%–120% range and were characterised by precision lower or equal to 20%. The validated method was used for a survey of 36 samples of honey produced in different areas of Cyprus and this is the first work on Cypriot honey samples investigating a broad range of pesticides. Only coumaphos was detected at concentrations higher than 0.01 mg kg^?1 in the 58.6% of the honey samples analysed for Coumaphos. The results were evaluated in accordance to the provisions of the Commission Regulation (EU) No 37/2010 on pharmacologically active substances and their classification regarding maximum residue limits (MRLs) in foodstuffs of animal origin. The concentrations of coumaphos in all positive samples were at levels much lower than the MRL.     

Chemical Synthesis Elucidates the Immunological Importance of a Pyruvate Modification in the Capsular Polysaccharide of Streptococcus pneumoniae Serotype 4

Carbohydrate modifications are believed to strongly affect the immunogenicity of glycans. Capsular polysaccharides (CPS) from bacterial pathogens are frequently equipped with a pyruvate that can be placed across the 4,6‐, 3,4‐, or 2,3‐positions. A trans‐2,3‐linked pyruvate is present on the CPS of the Gram‐positive bacterium Streptococcus pneumoniae serotype 4 (ST4), a pathogen responsible for pneumococcal infections. To assess the immunological importance of this modification within the CPS repeating unit, the first total synthesis of the glycan was carried out. Glycan microarrays containing a series of synthetic antigens demonstrated how antibodies raised against natural ST4 CPS specifically recognize the pyruvate within the context of the tetrasaccharide repeating unit. The pyruvate modification is a key motif for designing minimal synthetic carbohydrate vaccines for ST4.     

Order-Unity 13C Nuclear Polarization of [1-13C]Pyruvate in Seconds and the Interplay of Water and SABRE Enhancement

Signal Amplification By Reversible Exchange in SHield Enabled Alignment Transfer (SABRE-SHEATH) is investigated to achieve rapid hyperpolarization of ¹³C₁ spins of [1-¹³C]pyruvate, using parahydrogen as the source of nuclear spin order. Pyruvate exchange with an iridium polarization transfer complex can be modulated via a sensitive interplay between temperature and co-ligation of DMSO and H₂O. Order-unity ¹³C (>50 %) polarization of catalyst-bound [1-¹³C]pyruvate is achieved in less than 30 s by restricting the chemical exchange of [1-¹³C]pyruvate at lower temperatures. On the catalyst bound pyruvate, 39 % polarization is measured using a 1.4 T NMR spectrometer, and extrapolated to >50 % at the end of build-up in situ. The highest measured polarization of a 30-mM pyruvate sample, including free and bound pyruvate is 13 % when using 20 mM DMSO and 0.5 M water in CD₃OD. Efficient ¹³C polarization is also enabled by favorable relaxation dynamics in sub-microtesla magnetic fields, as indicated by fast polarization buildup rates compared to the T₁ spin-relaxation rates (e. g., ∼0.2 s⁻¹ versus ∼0.1 s⁻¹, respectively, for a 6 mM catalyst-[1-¹³C]pyruvate sample). Finally, the catalyst-bound hyperpolarized [1-¹³C]pyruvate can be released rapidly by cycling the temperature and/or by optimizing the amount of water, paving the way to future biomedical applications of hyperpolarized [1-¹³C]pyruvate produced via comparatively fast and simple SABRE-SHEATH-based approaches.